China Standard 3 Point Hitch 20-30HP Small Compact Tractor Ce Rear Mounted Pto Driven New Flail Mower tractor pto shaft

Product Description

Garden Tools 3 Point Flail Mower Lawn Mower For Tractor

Flail mower provide an effective solution for the control of excessive growth. PTO flail mower, also known as mulching mowers, are designed to mow and shred concurrently. The shredded materiall acts as an effective mulch, to retard ensuing growth while providing a medium that will better release nutrients into the soil.

Lift Duty Flail Mower
Model EF85 EF95 EF105 EF115 EF125 EF135 EF145 EF155 EF165 EF175
Structure weight(kg) 1m²/h
PTO speed 540r/min
PTO spline 6x8x1600mm
Tractor HP 40-85 50-90 60-90 65-100

 

ATV Finishing Mower
Model ATFM120 ATFM150
Working width(mm) 1200 1500
Structure weight(kg) 210 250
PTO speed 540r/min
No. of blades 6 6
Electric start Yes Yes
Engine HP 16HP (LONCIN)

 

Finishing Mower
Model FMH120 FMH150 FMH180
Cutting width(mm) 1200 1500 1800
Oil flow 30L/min
Motor 30cc
Working pressure 20Mpa
Blade No. 3pcs
Weight(kg) 242 271 295

 

Flail Collector
Model FCN120 FCN160
Stucture weight(kg) 323 367
Working width(mm) 1150 1550
Capacity 0.55m³ 0.7m³
PTO speed 540r/min
Flail type Y blade
No. of flails 56 72
Tractor HP 20-40 28-50

 

Heavy Duty Flail Mower
Model KDK170 KDK180 KDK190 KDK200 KDK210 KDK220 KDK240
Dimension(mm) 1700x915x580 1800x915x580 1900x915x580 2000x915x580 2100x915x580 2200x915x580 2280x915x580
Structure weight(kg) 450 470 490 510 525 540 560
Cutting width(mm) 1700 1800 1900 2000 2100 2200 2400
No. of hammers 28 28 28 32 32 38 38
PTO speed 540r/min
PTO spline 6x8x1600mm
Tractor HP 45-65 55-90 60-90 70-100 70-100 80-120 80-120

 

Top Mower
Model TM110 TM140 TM160 TM170
Structure weight(kg) 175 205 215 225
Cutting weight(mm) 1060 1360 1560 1660
Gear Box 40hp
PTO speed 540r/min
Tractor HP 18-25 20-35 25-40 30-50

 

Heavy Duty Flail Mower
Model TOL105 TOL115 TOL125 TOL135 TOL145 TOL155 TOL165
Cutting width(mm) 1050 1150 1250 1350 1450 1550 1650
Reach angle up 90°
Reach angle down 55°
PTO 540r/min
Tractor HP 18-25 25-45 35-65

 

Heavy Duty Flail Mower
Model TOS185 TOS205 TOS225
Cutting width(mm) 1850 2050 2250
Reach angle up 90°
Reach angle down 55°
PTO 540r/min
Tractor HP 55-85

 

Top Mower
Model DS4FT DS5FT DS6FT DS7FT
Dimension(mm) 1320x1220x980 1624x1524x980 1929x1829x980 2234x2134x980
Structure weight(kg) 170 220 240 260
Cutting width(mm) 1180 1484 1789 2094
Working efficiency 3500-9500m²/h 4400-12000m²/h 5300-14000m²/h 6200-16700m²/h
PTO speed 540r/min
PTO spline 6x8x1000mm
Tractor HP 20-35 25-40 40-70 60-100

 

Tractor Trimmer
Model TS80
Working width 800mm
Blade x2
Hydraulic motor 25cc(built-in pressure limiter)
Oil flow At least 30L/min
Tractor 25-35HP
Packing size 1600x950x500mm
Weight 197kg

Q: Are you factory or trading company?
A) We are ISO9001 certified factory, mainly manufacture in Forestry & Farm Machinery.
B) Using “Self-produced Self-marketing” business, reducing the cost of intermediate links.

Q: What’s your company advantages?
A) As the leading manufacturer of forest machines, we have exported to European market for more than 10 years, familiar with forest and farm market and can recommend to clients right products.
B) We have various products and can offer all the machines and tools in the forest and farm. You can get all the items you need. Easy and convenient for you.
C) With us your money and your business is safe. We can offer 7-days refund in case of bad quality.
D) Coming together is a beginning; keeping together is progress; working together is success.

Q: Can we buy 1 sample?
Yes, we need to add sample fee to the price and will return it back to your after receiving your large order in future.

Q: What’s your delivery time?
After receiving your payment, we start to produce your order. It usually takes about 15-45 days depending on the products you order.

Q: How do you control your quality?
To guarantee high quality and efficient management, we have passed ISO9001 quality management system certificate. All of our products are 100% inspected before shipment. Our whole manufacturing processes are under a very serious and strict system in our company.

Q: What’s your product warranty?
The warranty time of the machine is 1 year. During this period, we will send you the replacement for the broken part(not man made).
To meet the every demand of customer is our goal. We are standing by for any question of customer. We try to make our service fast, efficient and satisfied.

Q: What’s your company mainly exporting market?
We mainly export to European, North American, Australia, English and Southeast Asia Market. Because of good quality and service, we have establish good and long business relations with many clients. Welcome clients from all over the world to visit our factory.
 

Type: Mower
Power Source: Pto
Certification: CE
Cutting Width: 850-2200mm
Structure Weight: 100-2200mm
Pto Turning Speed: 540r/Min
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Standard 3 Point Hitch 20-30HP Small Compact Tractor Ce Rear Mounted Pto Driven New Flail Mower   tractor pto shaftChina Standard 3 Point Hitch 20-30HP Small Compact Tractor Ce Rear Mounted Pto Driven New Flail Mower   tractor pto shaft
editor by CX 2023-04-27

shafts pto

As one of leading shafts pto manufacturers, suppliers and exporters of products, We offer shafts pto and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shafts pto

Recent Posts